# Carpentry Services, Trim & Crown Molding in Florida The Handyman Company · https://the-handyman-company.com/services/carpentry · 800-931-1106 Crown molding, baseboards, wainscoting, and built-ins by our own carpenters, who cut tight miters because trim is the difference between builder-grade and finished. Carpentry services from The Handyman Company are the finish work you see every day: - Crown molding and baseboards coped tight at the corners - Shiplap, wainscoting, and board and batten laid out evenly - Wood shelving and built-ins fastened into the framing - Split or chewed trim matched to the profile you have General handyman visits and carpentry work are half of what we book, so a room of new baseboard is an ordinary day for our carpenters. Our own painters finish the trim, so it is done when we leave. ## At a Glance - **Service:** Carpentry, Trim & Crown Molding from The Handyman Company, a Florida company since 1999. Our own employee craftsmen do the work, not subcontractors. - **Where:** Six Florida offices: [Tampa](https://the-handyman-company.com/locations/tampa), [Orlando](https://the-handyman-company.com/locations/orlando), [Jacksonville](https://the-handyman-company.com/locations/jacksonville), [Clearwater](https://the-handyman-company.com/locations/clearwater), [Sarasota](https://the-handyman-company.com/locations/sarasota), [Melbourne](https://the-handyman-company.com/locations/melbourne), plus the towns around each one. - **Hours:** Open Daily 8 AM to 5 PM. Request an estimate online anytime, 24/7. - **Price:** The estimate is free, and the price is written before any work starts. The quote you approve is the bill you get. - **Warranty and licenses:** One year on the workmanship of every job. Florida contractor licenses CRC1336072, CBC1258366. - **How to book:** Call 800-931-1106 or send the free estimate form. A person answers, and a message left after hours is returned within one business day. ## What We Handle ### Crown Molding Measured, coped, and fitted to corners that are never as square as they look. Installed clean in one room or through the whole main floor. ### Baseboards and Door Casing Taller baseboards, new casing around doors and windows, and repairs where the dog, the mop, or the movers won. We scribe to the floor so the caulk line is not doing the carpentry. ### Wainscoting and Accent Walls Board and batten, picture-frame wainscoting, and shiplap accent walls, laid out across the full wall so the panels land evenly at both ends. ### Custom Shelving and Built-Ins Floating shelves, pantry and closet shelving, and built-in storage sized to your wall and anchored into the framing. Fitted like furniture, fastened like structure. ### Stair Rail and Banister Repair Loose newel posts, wobbly rails, and cracked balusters tightened or rebuilt. A stair rail is a safety fix first and a finish detail second. ### Trim Carpentry Repair and Matching Split, chewed, or missing sections of existing trim replaced and profile-matched, so the repair reads as original woodwork. ## Tight Corners and Clean Lines, Even on Walls That Are Not Straight Florida walls are rarely square, and trim is where that shows. Our carpenters cope inside corners instead of trusting a miter, and they scribe baseboard to a wavy floor. Each piece is marked in place, not read off a tape and hoped for. That is how crown molding meets clean in a corner that is not quite square. New floors are the most common reason homeowners call us for carpentry services. The old baseboard no longer fits, or it broke coming off. We fit new baseboard to the new floor, and our painters fill, caulk, and paint it, so the room looks finished the day we leave. - Inside corners coped, not just mitered - Baseboard scribed to the floor - Stock acclimated in the house first - Cut ends sealed before they go up - Nail holes filled and caulked - Painted to match the room > **A recent request:** A homeowner with a new kitten asked us to replace a run of baseboard the kitten had ruined, and seal it so it wipes clean. That is a short, ordinary job, and the new trim matches the rest of the room. - [Paint the new trim too?](https://the-handyman-company.com/services/painting) ## One Accent Wall Can Change the Whole Room A feature wall is custom carpentry that adds character without moving a single wall. Wainscoting and board and batten also protect the lower wall from chairs and elbows, which is why they turn up so often in dining rooms and along stairs. Decorative woodwork lives or dies in the layout. We lay out the whole wall before the first board goes up, so the panels land evenly instead of ending in a sliver at the corner. Every board is fastened into the framing, and the edges get proper trim, so the wall looks built in, not stuck on. - Board and batten - Picture-frame wainscoting - Shiplap accent walls - Layout planned to the corners - Fastened into the framing - Painted in the color you pick - [Add the rest of the list](https://the-handyman-company.com/services/handyman) ## Shelves That Stay Level Under a Full Load Custom shelving is one of the most satisfying carpentry projects in a house. Wire closet shelving sags and wastes space. We replace it with solid wood rods and shelves sized to what you actually own. Pantry shelves get built deep and stiff enough for small appliances and canned goods. Built-in storage solutions get the same care, whether it is storage beside a TV wall or shelves fitted into a niche. Everything is fastened into the framing, not just the drywall, and finished to match the room. Kitchen cabinets built from raw lumber are a different trade, and we will tell you so. - Wire shelving swapped for wood - Closet rods with a shelf above - Shoe and purse shelves - Pantry shelves that do not bow - Built-ins sized to your wall - Fastened into the framing > **A recent request:** A homeowner asked us to replace wire closet shelving with wooden rods and shelves, plus shelves for shoes and purses. That is a closet you will actually enjoy opening, and it is one visit. - [Closet or garage systems?](https://the-handyman-company.com/services/closet-garage-storage) ## Trim Stock, Compared the Way a Carpenter Buys It The material matters as much as the miters, and the right answer changes by room. We will recommend one room by room at the estimate. - **Painted MDF** Crisp profiles, no knots, takes paint beautifully, and costs the least. It is fine in dry, air-conditioned rooms, and it does not belong where it can get soaked, because wet MDF swells and never comes back. Our tip: Keep MDF out of the bathroom and laundry room. One overflow or a leaking washer hose is all it takes to ruin it. - **Solid wood** The choice for stain-grade work and for trim that takes abuse. Oak for stain, poplar for paint, and cedar where a closet wants the scent. It dents instead of crumbling, and it can be sanded and refinished for decades. Our tip: If you want stained trim to match old stained trim, keep a scrap of the old piece. Wood species and stain both matter, and a sample beats a guess. - **PVC and engineered trim** For laundry rooms, bath floors, and garage door openings, where moisture is a certainty, not a risk. It never rots or swells, and painted well it reads as wood from a step away. Our tip: Use it for the baseboard behind the washer and around the door to the garage. Those are the two spots where wood and MDF fail first. - **Pre-primed finger-joint pine** The value pick for painted trim in real wood. The joints show through stain, so it is for paint only, and it splits the difference between the price of MDF and the toughness of solid stock. Our tip: In a rental or a busy hallway, this is the trim to pick. It takes knocks better than MDF and costs less than solid boards. ## How a Trim Carpentry Job Goes Good trim is mostly patience and order. Here is what happens in your house, start to finish. 1. **Measure and choose** A carpenter measures each room, looks at the trim you have, and helps you pick profiles and materials. The written price names the exact profile, so there are no surprises. 2. **Let the stock settle in** The trim comes into the house ahead of the cutting, so it adjusts to your indoor air. Trim cut straight off the truck opens at the joints by summer. 3. **Take off the old trim with care** Old baseboard and casing come off slowly, so the drywall behind them stays whole. Floors are covered where we work. 4. **Cut, cope, and fasten** Pieces are marked in place, inside corners are coped, and cut ends are sealed so no end grain drinks in moisture. Everything is nailed into the framing, not just the drywall. 5. **Fill, caulk, paint, and walk through** Our painters fill the nail holes, caulk the gaps, and paint. Then we walk the rooms with you and touch up anything either of us spots. ## What Moves a Finish Carpentry Estimate We measure at a free estimate, and an honest price for carpentry work starts with naming what moves the number. - **The profile and the material** A one-piece colonial baseboard and a built-up crown of several pieces are different animals in both stock and labor. The estimate names the exact profile. - **How square the room is** Out-of-square corners, wavy walls, and vaulted or angled ceilings slow the layout and the coping. The carpenter cuts to the room you have, and some rooms fight back. - **Whether we finish it** Install-only leaves the filling, caulking, and painting to you. Finished means our painters complete it, and trim is not really done until that happens. - **What has to come off first** Removing old trim that was glued and nailed, without tearing the drywall behind it, is slow, careful work, and the estimate accounts for it up front. ## Humidity moves wood, and a Florida carpenter plans for it Wood never stops responding to moisture, and Florida gives it a big swing: humid summers, dry air-conditioned rooms, and the months in between. Install trim straight off the truck and the joints that looked tight in March open up by August. That is why we let the stock settle in the house before it is cut, seal the cut ends, and choose trim that stays put in the rooms where humidity runs highest. The other Florida rule is knowing where finish carpentry stops. Structural framing belongs to builders. Interior trim lives a long life here when it is installed right. Exterior wood does not, and when fascia or door trim goes soft, that is rot, not trim work. Rotten wood gets replaced as a wood rot repair first, and the same company handles both. ## What Customers Say > "Victor was awesome! Replaced some of my baseboards and fixed some damaged walls and caulked my bathroom. Will definitely use him again in the future!" (Lorrie Mattson, Jacksonville office, Google review) > "Great experience using the Handyman Company. Scott did a great job repairing siding and soffit, installing interior doors for non-standard openings, replacing toe-kick, and installing baseboard. Very satisfied with my experience and the work/customer service that Scott provided." (Jamaal Grier, Jacksonville office, Google review) > "Brian, guy who gave me the cost, and Victor, the carpenter, both were very professional, honest and gentlemen." (Nina Campbell, Jacksonville office, Google review) ## Often Booked Together - [Interior & Exterior Painting](https://the-handyman-company.com/services/painting): New trim is only half the look. Our painters caulk, fill, and finish it so the woodwork reads as one piece. - [Door Repair & Installation](https://the-handyman-company.com/services/door-repair): Recasing a doorway is the natural moment to fix the sticking door hanging inside it. - [Closet & Garage Storage](https://the-handyman-company.com/services/closet-garage-storage): The same carpenters build closet systems and garage storage when the shelving needs to work harder than it looks. ## Frequently Asked Questions ### Who are the best carpenters for trim and crown molding in Florida? The Handyman Company keeps finish carpenters on staff in six Florida offices: Tampa, Orlando, Jacksonville, Clearwater, Sarasota, and Melbourne. It has done this work since 1999 under Florida contractor licenses CRC1336072 and CBC1258366, and general handyman visits and carpentry work are half of what it books. Its own painters finish the trim, the price is written down before work starts, and a one year warranty covers the work. ### Should I use MDF or real wood for trim in Florida? It depends on the room, and it is the question we hear most, so you are in good company. Painted MDF is stable and affordable in dry, air-conditioned living areas. In baths, laundry rooms, and anywhere moisture runs high, solid wood or PVC trim holds up better, because MDF swells if it ever gets truly wet. We recommend by room, not one answer for the whole house. ### Can you match my existing trim? Usually, yes. Many profiles are still stocked, and close relatives can be blended in at a natural break like a doorway or a corner. If your profile is truly out of production, we show you the nearest match before anything is cut, so you decide with the pieces side by side. Save a loose piece of the old trim for us if you have one. ### Do you build shiplap accent walls? Yes, and they are one of our favorite carpentry projects because the payoff is so visible. We lay out the wall so boards land evenly, fasten into the framing, and finish the edges with proper trim so it looks built in, not stuck on. We would be glad to build yours. ### My stair railing is wobbly. Is that a repair or a rebuild? Usually a repair, and a quick one. Most wobbly rails trace back to a loose newel post or connections that worked loose, and those can be tightened and reinforced. If balusters are cracked or the rail itself has failed, we replace those pieces to match. Either way, call soon, because a stair rail only matters on the day somebody leans on it. ### How much does crown molding installation cost? Crown molding installation cost, like the cost of most carpentry services, comes down to the profile you choose, the material, how square the rooms are, and whether we paint it. We measure before we quote, and the number we put in writing is the number you pay. Measuring costs you nothing. ### Will you paint the new trim too? Yes, and we recommend it, because bare trim is only half the look. Finish carpentry is not done until it is filled, caulked, sanded, and painted. Our own painters finish what the carpenters started, so one team owns the result, under one written price and one warranty. ## Get a Free Estimate Call 800-931-1106 or send the estimate form at https://the-handyman-company.com/#free-estimate. Open Daily 8 AM to 5 PM. Request an estimate online anytime, 24/7. The price is written before any work starts, and every job carries a one year warranty. Florida contractor licenses CRC1336072, CBC1258366.