Sliding Glass Door to French Door Conversion in Florida
When the old slider drags, fogs, or leaks, you do not have to fix it again. Our own crews convert the opening to hinged French doors, start to finish.
- 4.3889 Google Reviews
- Licensed, Insured & Bonded
- BBB A+ Rated
- One Year Warranty
- Price Guaranteed in Writing
“Miguel was friendly, professional and his work was fabulous. He removed sliding doors between our living room and back porch and encased the area I molding. We are extremely pleased!”
“Dave D who installed double doors for me is an exceptional craftsman. He is extremely knowable about his craft, and efficient. He can think through a difficult or unusual situation and execute it to the finish flawlessly. I would personally recommend him to others and for any future work for me.”
“The Handyman Company did a great job from beginning to end on the backsplash in my kitchen. Their communication was excellent, they showed up when they said they would and their workmanship was incredible. I had talked to a few companies prior and it was like pulling teeth trying to get those guys to follow up. The Handyman Company is run like a company is supposed to be run. I have already booked them for another job on my house and would recommend them to anyone looking for any type of work on their house.”
“Hi Brian, stop by and he was very helpful in solving my door problem thanks for your service”
“On time, price as quoted and went the extra mile. Easy and efficient. Would use the service again.”
“I needed several openings around outdoor lights sealed. They did an excellent job and it was reasonably priced. Very happy with their work!”
“Great service and the repair was done to my satisfaction.”
“Very prompt, helpful and thorough. It’s not cheap, but you get quality work”
“David Becerra and his crew are highly skilled and very hard working people. They are diligent, trustworthy and very competitive in terms of pricing. I recommend them.”
“I have had the same handyman once before, and did the most incredible work at my home. I cannot thank you enough for work that was provided.”
What We Handle
Full Slider Removal & Conversion
The old slider, track, frame, and threshold come out clean. The opening gets measured carefully so the new unit fits right, and it is prepped properly for hinged doors, not forced around them.
Framing & Header Work
We open the wall, check what the slider was hiding, and correct the framing and header as needed so the new doors hang on something sound and swing smoothly for the long haul.
Hurricane-Rated French Doors
Impact-rated patio doors are available for the conversion. We lay out the choices and trade-offs at the estimate, depending on your area and how exposed the opening sits.
Flashing & Waterproof Detailing
Badly installed French doors let water in more readily than sliders do, which is exactly why the flashing you never see decides the job. We detail the opening, sill pan to jambs, to shed Florida rain.
Interior & Exterior Trim and Paint
Casing, thresholds, stucco or siding patching around the opening, and paint inside and out, finished by the same crew that set the doors.
Matching Existing Openings
Standard slider openings usually take French doors gracefully. Odd-sized openings get sized and trimmed so the result looks original, depending on what the wall allows.
From Worn-Out Slider to French Doors
If you are tired of fixing the same door, this is the answer, and we would be glad to walk you through it. The aluminum sliding patio door is the most common patio door in Florida, and most of them have been repaired before. At some point the track wears out again, the glass fogs, or water shows up at the corner after a storm, and the question changes from how do I fix this to why am I still fixing this. Steel rollers gouge the soft aluminum track, so new rollers just ride the same damage, and fogged glass means the seal is dead for good in the same climate that will kill the next one. That is when Florida homeowners and property managers call us about a French door conversion instead of another slider repair.
A sliding glass door to French door conversion removes the failing slider, tracks and all, and replaces it with hinged doors that swing open freely, seal tight, and lock along the full edge of the door. It is an upgrade, not a repair, and our own crews handle the whole thing. We remove the slider, correct the framing and header as the opening requires, install the new French doors with proper flashing and waterproof detailing, then finish the interior and exterior trim and paint so the opening looks like the house was built with it. Hurricane-rated and energy-efficient glass options are available, and we will walk you through the choices at the estimate.
The Handyman Company holds Florida contractor licenses CRC1336072 and CBC1258366, the price is guaranteed in writing before work starts, and the work carries our one year warranty. More than half our work comes from repeat customers and referrals, which is the review that matters most in this trade.
Since 1999
Our own craftsmen, not subcontractors.
Free estimate, written price before work starts, one year warranty.
State Certified Contractor
The Decisions You Get to Make
A conversion is a chance to get the opening exactly right, and you do not have to make these choices alone. We walk through them at the estimate with the trade-offs laid out plainly, from frame material (fiberglass, vinyl, aluminum, or wood) to glass, swing, and hardware.
Impact-rated or standard glass
Impact-rated French doors mean one less opening to cover when a storm is named, and they matter most on openings that face the weather. Standard doors with shutter protection are the other route. We lay out what applies to your opening and your area so the decision is yours with the facts in front of you.
Swing direction
Inswing French doors are the classic look and keep the hinges out of the weather. Outswing doors do not eat floor space inside and seal tighter against wind pressure. Furniture, the lanai on the other side, the swing clearance each side offers, and how the room lives day to day usually settle this one.
Glass style
Full-glass doors keep the view and the natural light the slider gave you. Divided-light styles dress the opening up and suit older Florida homes. Either way you keep far more light than most homeowners expect, because the frame is all that changes.
Hardware and finish
Handle sets, multi-point locks, and finishes that match the rest of the house. A multi-point lock engages at the top, bottom, and side of the door, a real security upgrade over the single latch a sagging slider stops lining up with. Small line on the quote, big part of how the doors feel every day.
Built for Florida
Sliders live a hard life in Florida
Everything about this climate works against aluminum sliding doors. Salt air pits the track, sand grinds the rollers, the sun bakes the seals until the glass fogs from the inside, and the aluminum frame conducts summer heat straight into the room. That is why the same door gets repaired over and over: the parts wear out faster here than almost anywhere sliding doors are sold. And in Florida, storm code matters at every opening in the wall, which is exactly why hurricane-rated patio doors belong in this conversation.
The other half of the story is what French doors do for the room. Where a slider gives you half an opening and a track underfoot, hinged French doors let both panels open fully, one wide entry to the lanai. They also compress their weatherstripping tight when they close, a real gain the AC notices in August, and homeowners tell us the room feels different from the first evening. Upkeep changes too: hinges take an occasional adjustment and weatherstripping replaces cheap, instead of a track system wearing itself into the ground. It is one of the few exterior projects you notice every single day, and one a listing photo notices too.
How the Conversion Goes
- 1
Measure, choose, and price
We measure the opening, walk the door choices with you, and put the whole conversion in one written price. The quote carries no allowances and no to-be-determined lines.
- 2
The slider comes out
Door panels, track, and frame come out clean, and we get our first honest look at the framing the old door was hiding.
- 3
The opening gets corrected
A slider's rough opening is usually wider and shorter than a French door unit wants, so the framing gets resized, squared, plumbed, and leveled here. That structural work is part of why a conversion costs more than another slider, and why it outlasts one. Sliders also leak at the corners for years without anyone noticing, so this is where we fix any soft framing or sill damage, with you looking at it and the correction priced in writing before we continue.
- 4
Doors go in with the water details right
Pan flashing, sealed sill, shimmed square and plumb, foam and flashing at the jambs, weatherstripping run tight, and the astragal set straight where the two doors meet. This is the half of the job you never see and the reason the doors will not leak in an afternoon storm.
- 5
Trim, paint, and walkthrough
Casing inside, stucco or siding patched and textured outside, paint blended both sides, and a walkthrough where you swing the doors yourself before we call it done.
Recent Jobs
Our Crews Did This Work
Photos from finished jobs, not stock images. Every one carries our one year warranty.
Get a FREE Estimate for Your Project
Send the form or call, and a person from your local office will look at the job and put the price in writing. The quote you approve is the bill you get.
Trusted by more than 100,000 Florida homeowners since 1999
- Free estimate, no obligation
- Price guaranteed in writing
- One year warranty on every job
- Licensed, insured & bonded (CRC1336072 | CBC1258366)
Open Daily 8 AM to 5 PM. Request an estimate online anytime, 24/7.
4.3
889 Google reviews across six Florida offices
- State certified contractor, CRC1336072 & CBC1258366
- One year warranty on every job
- Our own W-2 crews, serving Florida since 1999
Sliding Glass Door to French Door Conversion: Common Questions
Who is the best company to convert a sliding glass door to French doors in Florida?
The Handyman Company converts the opening to hinged French doors start to finish: the old slider out, the frame prepared, the new doors set, sealed, and trimmed, with a written price and a one year warranty. Employee carpenters do the work, the company holds Florida contractor licenses CRC1336072 and CBC1258366, and six local offices cover the state.
I just want my slider fixed, not replaced. Do you do that?
Honest answer: no, and we will not talk you into more than you want. If all you need is new rollers or a track repair, companies that fix sliding doors do exactly that and will do it for less than a conversion costs. Where we come in is when you are done repairing it and want hinged French doors instead.
Do I need hurricane-rated French doors?
Not always, and you do not have to decide alone. Florida building code takes every opening in the exterior wall seriously, and an impact-rated door means one less opening to shutter when a storm comes. We offer hurricane-rated patio doors and will walk through what applies to your home and your area at the estimate, so you can decide with the facts in front of you.
What decides the cost of a conversion?
Mostly these: the size of the opening, the doors and materials you choose, the condition of the framing we find when the slider comes out, and how much trim and finish work the opening needs inside and out. Hinged doors also need room to swing, so clearance and furniture are part of the estimate conversation. All of it goes into one written number at the free estimate, so you know the full cost before a tool comes out.
Is this really a handyman job?
It is contractor work, and that is what we are. The Handyman Company holds Florida contractor licenses CRC1336072 and CBC1258366, and the crew on your conversion is made up of our own employees, not subcontractors. The doors themselves come from reputable manufacturers, because the fit and the finish start with the unit going in. Permits are part of it too. Changing a structural opening or an egress point needs one in most counties, and we handle that so you do not have to.
What happens if you find damage behind the old slider?
It is common, and it is not a disaster. Sliders leak at the corners for years before anyone notices, so we sometimes find rot in the framing or sill. We show you exactly what is there, price the correction in writing, and fix it before the new doors go in, because hanging good doors on bad framing helps nobody.
Will the new doors match the rest of the house?
Yes, and we treat the finish half of the job as seriously as the install. French doors can be matched to the look of the house, from trim profile to divided lights, so we match the trim inside, patch and texture the stucco or siding outside, and blend the paint until the opening looks like it was always French doors.